Back
to Technology Awards
TECHNOLOGY DIVISION VI: METALLURGY
Gilbert R. Speich Award for Best Paper
Click
here for past recipients
HISTORY
AND PURPOSE
Originally established in 1992 in honor of Gilbert R. Speich, for his contributions to the field of ferrous physical metallurgy, was re-established as an AIST award in 2005. The award is presented to the author of a physical metallurgy technical paper judged to be the best of class by the AIST Metallurgy: Rolling & Processing Technology Committee.
|
| 2007 |
|
Matthew J. Merwin, “Microstructure and Properties of Cold Rolled and Annealed Low-Carbon Manganese TRIP Steels” |
| 2006 |
|
C. Scott, S. Allain, M. Faral, N. Guelton “The Development of a New Fe-Mn-C Austenitic Steel for Automotive Applications” |
| 2003 |
|
A. Pichler, S. Traint, G. Arnoldner, P. Stiaszny, M. Blaimschein, E.A. Werner "High-Strength Hot-Dip Galvanized Steel Grades: A Critical Comparison of Alloy Design, Line Configuation and Properties" |
| 2002 |
|
M. Blaimschein, H. Mildner, H. Pauli, A. Pichler, P. Stiaszny, J. Szinyur, S. Traint, E. Werner "Processing and Properties of Cold-Rolled Trip Steels" |
| 2001 |
|
A.K. De, B.C. De Cooman, B. Soenen, S. Vandeputte "Carbon Distribution Between Matrix, Grain Boundaries, and Dislocations in Ultra Low Carbon Bake Hardenable Steels" |
| 2000 |
|
K. DeBlauwe, B.C. De Cooman, M. DeMeyer, D. Vanderschueren "The Characterization of Retained Austenite in Trip Steels by X-RayDiffraction" |
| 1999 |
|
R.L. Bodnar, W. Furdanowicz, Y. Shen "An Assessment of the Application of TiN Technology to Controlled Rolled, Low Carbon, Nb-(V) Steels" |
| 1998 |
|
A.J. Afaganis, K.R. Barnes, G.E. Hanson, R.G. Lessard "Development and Production of Large Diameter, High Toughness X80 (Gr.550) Pipe at Stelco" |
| 1997 |
|
M.J. Leap, J.C. Wingert "Application of the Advantec® Process for Improving the Toughness of Grain-Refined, High-Strength Steels" |
| 1996 |
|
K. Ramanujachar, S.V. Subramanian "Strategies to Replace Lead in Free-Cutting Steels" |
| 1995 |
|
O. Akisue, K. Usioda, N. Yoshinaga "Development of Deep-Drawable and Bake-Hardened Ultra Low-C Steel Sheets by (a + y) and y Phase Annealing" |
| 1994 |
|
S. Ohashi, T. Takahashi, T. Tarui, R. Uemori "Effect of Silicon on the Age Softening of High Carbon Steel Wire" |
| 1993 |
|
M.E. Fint, R.P. Foley "The Effect of Tempering on the Tensile Behavior of a Low Carbon Steel at 77, 188, and 298K: Normal and Intercritical Tempering Effects" |
| 1992 |
|
R.L. Bodnar, M. Linn, S.S. Hansen "The Physical Metallurgy of Forged Cold Mill Work Roll Steels" |
|
