| 2012 |
Sunday O. Abraham
Shaojie Chen
James C.B. Asante
Colin D’Souza
Kendal S. Dunnett
Shahrooz Nafisi
Aaron Cook
Geoffrey Franco |
“Hydrogen and Nitrogen Control and Breakout Warning Model for Casting Non-Degassed Steel” |
| 2011 |
Dan G. Edelman
Peter C. Campbell
Chris R. Killmore
Kristin R. Carpenter
Harold R. Kaul
James G. Williams
Walter N. Blejde |
| “Recent Developments With Ultrathin Cast Strip Products” |
|
2010 |
Raimundo A.F.O. Fortes
Hiroyuki Matsuura
Richard J. Fruehan |
“Decarburization and Slag Formation Model for Electric Arc Furnace” |
2009 |
Stanley S. Sun
Dongsheng Liao
Neal K. Pyke
Kevin R. Boylan
Glenn Wallace
|
“Development of an Offgas/Model Technology to Replace Sublance Operation for KOBM Endpoint Carbon Control at Dofasco” |
|
2008
|
Kenneth E. Blazek, Oscar Lanzi III, Phil L. Gano, Dale L. Kellogg |
“Calculation of the Peritectic Range for Steel Alloys” |
|
2007
|
Colin Scott
Sebastien Allain
Michel Faral
Nicholas Guelton |
"The Development of a New Fe-Mn-C austenitic steel for Automotive Applications" |
2006 |
Hongbin Yin |
Inclusion Characterization and Thermodynamics for High-Al Advanced High-strength Steels. |
2004 |
B.G. Thomas
Q. Yuan
P. Vanka
|
“Turbulent Flow and Particle Motion in the Continuous
Slab Casting Mold” |
| Hunt
Recipients - Back to top |
|
2003 |
A.
Pichler
S. Traint
H. Pauli
H. Mildner
J. Szinyur
M. Blaimschein
P. Stiaszny
E. Werner
|
“Processing
and Properties of Cold-Rolled Trip Steels” |
2002 |
M.
A. Schueren
J. Schade
R. J. Komanecky |
“Quality
and Productivity Improvements with a Revised Tundish Flow System
at AK Steel’s Middletown Works” |
2001 |
R.
L. Bodnar
Y. Shen
V. Furdanowicz |
"An
Assessment of the Application of TiN Technology to Controlled
Rolled, Low Carbon Nb and Nb-V Steels" |
2000 |
K.
Eberle
P. Harlet
P. J. Cantinieaux
M. V. Populiere |
“New
Thermomechanical Strategies for the Realization of Multiphase
Steels Showing a Transformation Induced Plasticity (TRIP) Effect” |
1999 |
B.
G. Thomas |
“Modeling
Study of Intermixing in Tundish and Strand During a Continuous-Casting
Grade Transition” |
1998 |
X.
Huang
B. G. Thomas |
“Intermixing
Model of Continuous Casting During a Grade Transition” |
1997 |
M.
R. Barnett
J. J. Jonas
P. D. Hodgson |
"A
Comparison Between the Recrystallization Behaviors of Warm and
Cold Rolled Ferrite" |
1996 |
V.
Leroy
J. C. Herman |
"The
Microstructure and Properties of Steels Processed by Thin Slab
Casting" |
1995 |
L.
M. Keilman
S. M. Galloway
S. R. Balajee
C. J. Bragg |
"Oxygen
Lance Design Modifications to Improve the Lance Life and Performance
at Inland's No. 2 BOF/CC Shop" |
1994 |
J.
D. Thomas
C. E. Scheid
G. H. Geiger |
"Nitrogen
Control During Electric Furnace Steelmaking" |
1993 |
R.
B. Mahapatra
J. K. Brimacombe
I. V. Samarasekera
B. N. Walker
E. F. Patterson
J. D. Young |
"Mold
Behavior and Its Influence on Quality in the Continuous Casting
of Steel Slabs” |
1992 |
M.
Kanemoto
T. Ibaraki
S. Ogata
H. Katayama
H. Ishikawa |
"Development
of Smelting Reduction of Iron Ore--An Approach to Commercial
Ironmaking" |
1991 |
C. E. Tomazin
W. H. Emling
J. S. Powers |
"Refinement
of Casting Parameters for Improved Surface Quality of Cold Rolled
AKDQ Sheet" |
1990 |
J.
Schade
S. A. Argyropoulos
A. McLean |
"Cored-Wire
Microexothermic Alloys for Tundish Metallurgy" |
1989 |
Douglas
C. Dean |
"The
Physical Metallurgy of Strip Cast Type 304 Stainless Steel" |
1988 |
D.
M. Kundrat |
"Development
of an Analytical Equation for Calculation of the Blast Furnace
Fuel Rate" |
1987 |
M.
Byrne
A. W. Cramb
T. W. Fenicle |
"The
Sources of Exogenous Inclusions in Continuous Cast, Aluminum-Killed
Steels" |
1986 |
D.
L. Paton
S. Critchley |
"Tandem
Mill Vibration: Its Cause and Control" |
1985 |
M.
R. Ozgu |
"Thinner
Walled Ingot Molds: Mathematical Modeling of Thermal Stresses
and Plant Trials With Lighter Big-End-Up Molds" |
1984 |
John
D. Young
Donald J. Harris |
"Water
Modeling - A Viable Production Tool" |
1983 |
I.
V. Samarasekera
J. K. Brimacombe |
"The
Thermal and Mechanical Behavior of Continuous Casting Billet
Moulds" |
1982 |
E.
T. Turkdogan
G. J. Kor
R. J. Fruehan |
"Studies
of Blast Furnace Reactions" |
1981 |
Richard
S. Hostetter
Helmut Kranenberg
David C. Ronemus |
"A
New Method of Controlling Finishing Temperature in Modern High
Speed Bar Rolling Mills" |
1980 |
J.
K. Brimacombe
F. Weinberg
E. B. Hawbolt |
"Formation
of Longitudinal, Midface Cracks in Continuously-Cast Slabs" |
1979 |
S.
K. Sharma
J. W. Hlinka
D. W. Kern |
"The
Bath Circulation Jet Penetration and High-Temperature Reaction
Zone in BOF Steelmaking" |
1978 |
D.
J. Wilson
John J. DeBarbadillo
Edwin Snape |
"Desulfurization,
Deoxidation and Sulfide Shape Control with Nickel-Magnesium" |
1977 |
Jochen
Wendorff
Edgar Spetzler |
"Injection
of Alkaline Earth into Steel Melts and Its Effects on Steel
Properties" |
1976 |
John
Farrell
Donald C. Hilty |
"Modification
of Inclusions by Calcium" |
1975 |
Frank
C. Petrilli
Ramchandra K. Iyengar |
"Slagmaking
Reactions in the BOF Process"
|
1974 |
J.
W. Onuscheck
R. L. W. Holmes |
"Oxy-Fuel
Oil Practices and Performance for B.O.F. Steelmaking" |
1973 |
T.
Raymond Meadowcroft
Robert J. Milbourne |
"A
New Process for Continuously Casting Aluminum Killed Steel" |
1972 |
Laszlo
Backer
Paul Remy Gosselin |
"Continuous
Casting: Its Metallurgical Aspects Relative to High Grade Alloy
and Carbon Steels" |
1971 |
Paul
Kozakevitch |
"Foams
and Emulsions in Steelmaking" |
1970 |
G.
R. Belton
R. J. Fruehan |
"Mass
Spectrometric Determination of Activities in Iron-Aluminum and
Silver-Aluminum Liquid Alloys" |
1969 |
William
O. Philbrook
R. H. Spitzer
R. S. Manning |
"Simulation
of Topochemical Reduction of Hematite via Intermediate Oxides
in an Isothermal Countercurrent Reactor" |
1968 |
Lawrence
S. Darken |
"Thermodynamics
of Binary Metallic Solutions" and "Thermodynamics
of Ternary Metallic Solutions" |
1967 |
E.
T. Turkdogan |
"Causes
and Effects of Deoxidation Occurring During Cooling and Solidification
of Steels" |
1966 |
A.
E. Jenkins
N. A. Warner
L. A. Baker |
"Kinetics
of Decarburization of Liquid Iron in an Oxidizing Atmosphere
Using the Levitation Technique"
|
|
First Place |
Shannon
L. Quinn
Vit Vaculik |
"Improving
the desulfurization process using adaptive multivariate
statistical modeling" |
Second
Place |
Jeffrey
V. Greenwell
Jennifer D. Lajun |
Olimpio
F. Angeles "20/20 project at U.S. Steel's Gary Works" |
Third
Place |
Angelo
Petruccelli
Mario J. Pin
Jim P. Denomme
Robert J. Donaldson |
"Two-stove
operation at Dofasco's No. 3 Blast Furnace" |
|
|
First
Place |
T.
Neil Thorla |
"Installing
metals mndustry mower and montrol mystems to minimize
EMI" |
Second
Place |
Owen K. Struiksma
Richard D. Chaykowski
Robert J. Donaldson
|
"Requirements
for a 20 year campaign at Dofasco's No. 4 blast furnace" |
Third
Place |
Beri
Grewal
Robert Borthwick
Stanley Y. Shiraishi
|
"Elimination
of BOF lance port fugitive emissions at Lake Erie Steel" |
|
|
First
Place |
Remn-Min
Guo |
"Implementation
of a plant-wide control and information system for cold
mills using three-tier architecture" |
Second
Place |
Charles
V. Lauricella |
"A
model to predict average coke-oven charge densities" |
Third
Place |
Mark
J. Thieman
Roger L. Murphy
|
"Automated
coil handling and in-process inventory system" |
|
|
First
Place |
Lou
B. Donkle III |
"Fifth-octave
chatter problem solved using vibration analysis" |
Second
Place |
Alan
D. Strauss
Joseph S. Giunta
|
"Evaluation
of metallurical coal blends in the calderon coking reactor" |
Third
Place |
Masao
Fujita
Hirotaka Kojima
Hironari Marushima
Takanari Kawai
|
"Reduced
revamp duration at Chiba No. 6 blast furnace" |
|
|
First
Place |
Erkki
Pisilä
Sakari Kallo
Pekka Inkala
|
"First
compact bell-less top on a blast furnace: installation
and operating results at Rautaruukki" |
Second
Place |
Udit
Sharma
Gareth I. Parfitt
|
"Application
of fuzzy logic technology to tandem mill transitional
gauge variation" |
Third
Place |
J.
Barry Hyde
W. Richard Brown
Steven W. Hutchinson
|
"Start-up
of Stelco blast furnace pulverized coal injection facility" |
|
|
First
Place |
Richard
P. Smith Jr. |
"Flatness
control in coiled plate Lukens' wide, cut to length line" |
Second
Place |
Yoshinori
Anabuki
Takayuki Yoshioka
Akio Shinohara
|
"Coating
weight control system at Kawasaki Steel continuous line" |
Third
Place |
William
H. Parks
Christopher S. Haggerty
Timothy R. Rock
|
"Ferritic
rolling of interstitial-free steel" |
|
|
First
Place |
James
J. Robinson
Gerhard van Steden
Frederik ter Lingen
|
"Effect
of back-up roll wear on operation and strip shape of a
CVC cold mill" |
Second
Place |
Yong-Zai
Lu
|
"Meeting
the challenge of intelligent system technologies in the
iron and steel industry" |
Third
Place |
Anthony
P. Martocci
|
"Cost
and conservation in the steel industry" |
|
|
First
Place |
John
G. M. Tellman
Gerrit J. Heesen
|
"Improving
crown performance of a hot strip mill" |
Second
Place |
Osamu
Lida
Yuichi Ushijima
Toshiro Sawada
|
"Application
of AI techniques to blast furnace operations" |
Third
Place |
Steven
W. Markward
Yong-Zai Lu
|
"Integrated
neural system for coating weight control of a hot dip
galvanizing line" |
|
|
First
Place |
Jose
M. deJesus Sr. |
"Structural
dynamics and design aspects of leaf spring guided slab
oscillator" |
Second
Place |
Remn-Min
Guo |
"Material
damping effect in cold rolling process" |
Third
Place |
Yoshiyuki
Kaseda
Takeshi Masui
|
"Control
of buckling and crossbow in strip processing lines" |
|
|
First
Place |
Remn-Min
Guo
Andre C. Urso
Jerry H. Schunk
|
"Analysis
of chatter vibration phenomena of rolling mills using
finite element methods" |
Second
Place |
Shinjiro
Murakami
Ichiro Tanokuchi
Namio Suganuma
|
"Kawasaki
Steel's multipurpose coating line" |
Third
Place |
K.
C. Shaw |
"Biological
treatment of full-strength coke plant wastewater at Geneva
Steel" |
|
|
First
Place |
Remn-Min
Guo |
"Stress
analysis and life expectancy of rolling housings" |
First
Place |
Ronald
C. Brouwer
Edwin E. Schoone
Hisko L. Toxopeus
|
"Coal
injection driven to the limits" |
Third
Place |
James
J. D'Orazio
Edward T. Nowak
|
"Design,
installation and commissioning of I/N Kote" |
|
|
First
Place |
E.
Michael G. Heaven
Vit Vaculik
|
"Dofasco's
flatness and profile control program" |
Second
Place |
David
H. Wakelin
Keki S. Nanavati
Edward J. Spirko
|
"Stave
and intensified plate-cooled blast furnaces at LTV Steel" |
Third
Place |
Akio
Adachi
Thomas D. Bush
Mack Hoffman
|
"Crown
reduction in hot strip rolling by taper crown rolls" |
|
|
First
Place |
Marian
T. Szatkowski |
"Recent
advances in vacuum metallurgy process control" |
Second
Place |
Remn-Min
Guo |
"Development
of a mathematical model for strip thickness profile" |
Third
Place |
Edward
M. O'Donnell
Scott A Muniz (deceased), Kenneth
J. Schuett
Donald G. White
|
"Application
of improved technology to attain higher blast furnace
productivity" |
|
|
First
Place |
Remn-Min
Guo
Jerry H. Schunk
|
"Determination
of optimal work roll crown for a hot strip mill" |
Second
Place |
James
M. Hennes |
"Closed-loop
tension regulation and control modernization of Inland
Steel's No. 3 galvanizing line" |
Third
Place |
Kazuaki
Yamamoto
Katsuhiko Doi
Yasuharu Miyazaki
|
"A-C
drive system in tandem cold mill main drives" |
|
|
First
Place |
Remn-Min
Guo |
"Characteristics
of rolling mills with roll shifting" |
Second
Place |
Melvyn
J. Hague
Derek Partington
|
"Diagnostic
aids for quality improvement and maintenance in continuous
casters" |
Third
Place |
Brian
E. Johnson
Richard E. Horvat
|
"On-line
measurement of hot strip profile on the Burns Harbor 80-in.
hot strip mill" |
|
|
First
Place |
Keigo
Okuno
Hideyuki Naruwa
Takashi Kuribayashi
Tsutomu Takamoto
|
"Dynamic
spray cooling control system for continuous casting" |
Second
Place |
Robert
G. Goffin |
"Six
years of maintenance experience on Stelco's Lake Erie
blast furnace" |
Third
Place |
Shinji
Kojima
Toshiyuki Iwantani
Masahiro Yoshisa
Mizushima Works
Michio Hirose
|
"Vibration
of a combined blowing converter" |
|
|
First
Place |
Millet
L. Wei
Kripa N. Singh
|
"Design
of refractory lining and steel shell for caster ladles" |
Second
Place |
Guy
Monaco |
"Advanced
analysis for design of BOF ductwork" |
Third
Place |
Kenneth
R. Swanson
Bruce B. Grube
Robert Q. McClarin
Paul J. Erspamer
William G. Eckert
|
"On-line
shape measurement and control for a 2-stand temper mill" |
|
|
First
Place |
Robert
W. Moffat
M. Christopher Moore
Montague J. Robinson
J. Douglas Ashton
|
"Computer
Control of hot strip coiling temperature with variable
flow laminar sprays" |
Second
Place |
Rolf
M. Essig
Clare R. Hansen
|
"Maintenance
of steel mill rolls by turning" |
Third
Place |
Kenneth
R. Swanson
Joseph A. Grohowski
Paul J. Erspamer
William G. Eckert
|
"Application
of the Blaw-Knox inflatable crown roll to a 2-stand temper
mill" |
|
|
First
Place |
Robert
R. Sommers
Gary T. Pallone
John F. McDermott
Wayne H. Harris
|
"Verification
and applications of a model for predicting hot strip profile,
crown and flatness" |
Second
Place |
Guy
Monaco
Dino Rubli
|
"An
advanced approach to the dynamic analysis of rolling mill
foundations" |
Third
Place |
Ronald
J. Fradeneck
Thomas R. Davis
Roy T. Zackey (deceased)
|
"Low-cost,
dynamic predictive maintenance system at Bethlehem Steel" |
|
|
First
Place |
Toshihiko
Nagai
Junzo Yamada
Takeshi Masui
Tetsuya Kuwayama
|
"Strip
shape and profile control with Sumitomo variable crown
roll system" |
Second
Place |
Kiyomi
Taguchi
Masayuki Hanmyo
Yuusuke Shiratani
Teruyuki Hasagawa
|
"Improving
the BOF process by bottom blowing: The NK-CB process" |
Third
Place |
Jack
O. Horsley
James A. Boggs
|
"Practical
energy conservation measures in hot mill operations-Rouge
Steel Co." |
|
|
First
Place |
F.
Hollander
S. P. A. Zuurbier
|
"Design,
development and performance of on-line computer control
in a 3-zone reheating furnace" |
Second
Place |
Koichi
Horio
Nobuyuki Kitamura
Yutake Ariake
|
"Waste
energy recovery at Kashima steel works" |
Third
Place |
Douglas
K. Besselievre
Tommy Lemonis
David H. Reed
Barney T. Schmidt
|
"Texas
works' electric furnace/caster process control computer
system" |
|
|
First
Place |
Guy
Monaco |
"Modern
engineering approach to costly drive system problems" |
Second
Place |
Millet
L. Wei
Thomas E. James (deceased)
|
"Design,
maintenance and repair of blast furnace bustle pipes" |
Third
Place |
William
Smith
Alex G. Watson
|
"The
Coilbox- a new approach to hot strip rolling" |
|
|
First
Place |
G.
W. Zuurbier |
"Lessons
from structural failures" |
Second
Place |
Joseph
V. Poplawski
Donald Seccombe Jr.
|
"Bethlehem's
contribution to the mathematical modeling of cold rolling
in tandem mills" |
Third
Place |
Dennis
O'Connell
T. Neil Thorla
|
"Modernizing
a hot strip finishing mill main drive control at Inland
Steel" |
|
|
First
Place |
William
M. Bloom |
"Jet
heat recuperation of waste furnace gases on strip lines" |
Second
Place |
C.
C. Whitfield
B. J. Coulas
D. W. Brisland
|
"Control
system of No. 7 blast furnace at Algoma and relationship
to furnace operation" |
Third
Place |
K.
M. Markarian
M.S. Kovatch
|
"Noise
control in Rebuplic's Cleveland BOF shop" |
|
|
First
Place |
M. W. Vance
B.P. Perconti
J. B. Reneau
|
"Application
of skid pipe insulation in slab reheating furnaces" |
Second
Place |
Arthur
E. Williams
Kenneth W. Hazard
|
"The
engineering and installation of two 225-ton Q-BOP vessels
in an open hearth shop" |
Third
Place |
Eugene
R. Johnson
James C. Simmons
|
"CF&I
replaces 73 year old open hearth shop with UHP electric
arc furnaces" |
Third
Place |
Derek
W. Brisland
S. E. Nanne
|
"Engineering
and equipment features of the No. 7 blast furnace at Algoma" |
|
|
First
Place |
S.
J. Kletch
G. W. Baggley
P. R. Bleackley
|
"Theory
and practice for design, inspection and maintenance of
coke-oven gas lines" |
Second
Place |
Leonard
M. Saunders |
"The
contour of blast furnace hearths" |
Third
Place |
Gerald
R. Seifert |
"Changing
to horizontal coil handling in an 80-in. hot strip mill" |
|
|
First
Place |
Franz
Hollander
A. G. Reinen
|
"Automatic
shape control-Hoogovens' 88-in. hot strip mill" |
Second
Place |
Hirotoshi
Fujimori
Masanobu Inubushi
|
"Blast
furnace gas energy recovery turbine and its operation" |
Third
Place |
Ernest
J. McCluskey |
"Design
engineering of the OG gas cleaning system at Inland's
No. 2 BOF shop" |
|
|
First
Place |
T.
Pajor
A. Ostling
|
"Mechanical
problems associated with Inland's 2-strand slab caster-start-up
and operation" |
Second
Place |
H.
E. Muller |
"
High-chrome work rolls in a modern hot strip mill" |
Third
Place |
M.
W. Dominy |
"Training
of electrical maintenance personnel at Burns Harbor plant" |
|
|
First
Place |
Colin
N. Hammill
Leslie C. McLean
Ahmed A. Ghobarah
|
"Why
did that roll break" |
Second
Place |
John
B. Hodsden
William L. Van Kley
|
"Cascade
rinse system at Inland's 63-in. continuous strip pickling
line" |
Third
Place |
L.
Tellier
I. Mozer
S. F. Turcotte
|
"Direct
reduction and steelmaking at Sidbec-Dofasco" |
|
|
First
Place |
Edmund
L. Mangan
Ronald J. Fradeneck
|
"Ingot
weighing to improve weight control and plant yield" |
Second
Place |
Leslie
M. Bernich |
"Roll
force determination in hot rolling" |
Third
Place |
Peter
Kehl |
"The
Hamburg Steelplant, an example for producing steel on
the basis of direct reduced ore" |
|
|
First
Place |
Pierre
J. Leroy |
"Oxygen
blowing by the LWS process" |
Second
Place |
Vincent
J. Pongia
H. D. Swarr
|
"A
specialty plate producer's experience with continuous
slab casting" |
Third
Place |
Shigeru
Toyoda |
Described
the entire Oita works, a fully integrated plant, in his
article |
|
|
First
Place |
J.
H. Richards
J. N. Hornak
|
"U.
S. Steel Corp's first ingot-free electric arc steel melting
shop" |
Second
Place |
F.
Hollander |
"Design
and control for advanced runout table processing" |
Third
Place |
Richard
Adams |
"New
standard for Armco cranes" |
|
|
First
Place |
J.
W. Hlinka
T. W. Miller
|
"Temperature
loss in liquid steel-refractory systems" |
Second
Place |
E.
A. Mizikar |
"Spray
cooling investigation for continuous casting of billets
and blooms" |
Third
Place |
R.
R. Sommers
G. T. Pallone
|
"Verification
of a heat transfer model for predicting strip temperature
in a continuous furnace" |
|
|
First
Place |
John
W. Traub Jr.
Ronald M. Hilmer
|
"Alan
Wood's BOF Shop" |
Second
Place |
G.
D. Ries |
"Problems
in steel mill roll salvage" |
Third
Place |
W.
G. Jenkins
C. C. Pullen
H. A. List
|
"Sparrows
Point 56-in. hot strip mill gage control system" |
|
|
First
Place |
W.
L. Roberts |
"Thermal
considerations in tandem cold rolling operations" |
Second
Place |
A.
M. Kuszaj |
"Hot
strip mill downcoiler design considerations" |
Third
Place |
Joseph
B. Bailey |
"Electrical
maintenance training for the seventies" |
|
|
First
Place |
|
|
Second
Place |
|
|
Third
Place |
|
|
|
|
First
Place |
William
Wargo |
"Accelerated
cooling after coil annealing" |
Second
Place |
D.
W. Brisland
R. Wismer
|
"Experience
with rectifier drives at the Algoma Steel Corp." |
Third
Place |
D.
I. Brown |
"Quality
factors indirect cast steel billets" |
|
|
First
Place |
Tatsuo
Yamada |
"Three-bell
blast furnace operation in Japan" |
Second
Place |
J.
N. Hornak |
"Vacuum
degassing - why and how?" |
Third
Place |
A.
E. Cichelli |
"Plant
lubrication - an engineering approach" |
|
|
First
Place |
R.
D. Hindson |
"A
look at engineering in industry" |
Second
Place |
W.
W. Bintzer |
"Design
and operation of a fume and dust collection system for
two 100-ton electric furnaces" |
Third
Place |
R.
J. Bentz
W. L. Roberts
|
"The
efficiency of cold reduction mills in the rolling of steel
strip" |
|
|
First
Place |
D.
H. Miller
Dr. T. E. Dancy
|
"Continuous
casting-past, present and future" |
Second
Place |
G.
A. Henderson |
"Behtlehem
Steel Co.'s 45-in. slabbing mill at lackawanna Plant" |
Third
Place |
A.
T. Forrest |
"Crucible's
56-in. semi-continuous hot strip mill" |
|
|
First
Place |
Stephen
Vajda |
"Obtaining
1800-F blast from existing stoves" |
Second
Place |
Second Place
R. L. Sigl
|
"A
new approach to improved soaking pit performance" |
Third
Place |
I.
G. Orellana |
"Electrical
details of Republic's automated 134-in. plate mill" |
|
|
First
Place |
Dr.
A. H. El-Waziri |
"The
transient temperature distribution within slabs heated
in continuous furnaces" |
Second
Place |
Carl
F. Bessent |
"Techniques
in rebuilding open hearth furnaces" |
Third
Place |
W.
N. Spray |
"The
next step in steel plant data processing" |
|
|
First
Place |
John
S. Ride |
"Anaylsis
of operational factors derived from hot strip mill tests" |
Second
Place |
G.
Yocom |
"Blowing
methods in steelmaking" |
Third
Place |
G. S. Ross
L. E. Ringer
|
"Application
of speed regulators to the Geneva Works hot strip finishing
mills" |
|
|
First
Place |
Louis
Moses |
"Mathematical
aids to determine spread and reduction rates in rolling" |
Second
Place |
Henry
C. Bigge
Elliott A. Reid
|
"Vacuum
pouring for large forging production" |
Third
Place |
R.
W. Barnitz
H. H. Shakely
|
"Recent
developments in design and control of hot strip mills" |
|
|
First
Place |
Carl
F. Bessent |
"Techniques
in rebuilding a blast furnace" |
Second
Place |
F.
Slemar
G. E. Kennedy
|
"Turn-up
and turn-down in hot rolling" |
Third
Place |
A.
E. Cichelli |
"Mill
gearing as viewed by a lubrication engineer" |
|
|
First
Place |
J.
J. Murray
Thomas C. Graham
|
"The
design of mill buildings" |
Second
Place |
Herman
E. Muller |
"Roll
pass design for combination structural and wide flange
beam mills" |
Third
Place |
Third Place
John Simon
|
"High
temperature steel mill greases" |
|
|
First
Place |
A.
M. Cameron |
"Basic
formulas for roll design and rolling of alloy steels" |
Second
Place |
Allen
D. Brandt |
"Are
you getting good returns from your ventilating investment" |
Third
Place |
K.
S. Huha |
"Short
circuit protection of low voltage motors and starters" |
|
|
First
Place |
Harry
S. Spitz |
"Water
processing at Fairless Works" |
Second
Place |
D.
O. Davis |
"The
oxygen steelmaking process" |
Third
Place |
J.
A. Bell |
"Taper
vs. straight tread crane wheels" |
|
|
First
Place |
George
S. Mican |
"A
new theory of hot rolling" |
Second
Place |
E.
A. Vierow
|
"Metallic
recuperators in the steel industry" |
Third
Place |
E.
T. Lorig |
"Application
and use of self-centering rolls" |
|
|
First
Place |
A.
J. Krombholz |
"Recovery
of tin from scrap tinplate" |
Second
Place |
F.
H. Bremmer
F. J. Zehnder
|
"Continuous
heat treatment process produces high strength oil well
casing" |
Third
Place |
A.
E. Cichelli |
"Considerations
in the design of plain bearings" |
|
|
First
Place |
J.
L. Holmquist |
"Investigation
of the piercing process by means of model wax billets" |
Second
Place |
E.
H. Cauger
J. C. Slamm Jr.
|
"Operative
results of one-way fired recuperative soaking pits" |
Third
Place |
A.
F. Kritscher |
"High
Temperature-high Speed Heating" |
|
|
First
Place |
Louis
Moses |
"A
report of Rolling Experiences" |
Second
Place |
F.
H. Wickline |
"Requirements
for a Modern Seel Mill Power Distribution System" |
Third
Place |
John
R. Chegwidden |
"Effect
of Track Time on Soaking Pit Heating" |
|
|
First
Place |
E.
T. Long |
"Automatic
Self-centering Rolls and Pulleys" |
Second
Place |
Carl
G. Hogberg |
"Technical
Aspects of Northern and Southern Blast Furnace Practice" |
Third
Place |
Frank
Janecek |
"Five
Years of Blast Furnace Operation Under Elevated Top Pressure" |
|
|
First
Place |
George
S. Mican |
"Deformation
in Rolling" |
Second
Place |
A.
J. Fisher |
"Fuel
Oil in the Steel Industry" |
Third
Place |
K.
N. Bundy
P. E. Jordan
|
"Water
Pollution Control in the Steel Industry" |
|
