Continuous Casting — A Practical Training Seminar
18–20 October 2022, Fort Worth, Texas, USA
Schedule | Attending Companies | AIST’s Continuous Casting Technology Committee

Environmental Solutions: Meeting EPA Air Emission Requirements
25–27 October 2022, Orlando, Fla., USA
Schedule | Attending Companies | AIST’s Environmental Solutions Technology Committee

The 8th International Congress on the Science
and Technology of Steelmaking (ICS)
2–4 August 2022, Montreal, Que., Canada
AIST’s Metallurgy — Steelmaking & CastingTechnology Committee

4th Ingot Casting Rolling Forging (ICRF)
21–23 March 2022, Indianapolis, Ind., USA
AIST’s Specialty Alloy & Foundry Technology Committee

Sheet Processing and Finishing Lines 
20–23 March 2022, Indianapolis, Ind., USA
Schedule | Attending Companies | AIST’s Rolling and Processing Technology Division

Energy and Utilities Workshop 
14–17 March 2022, Oak Ridge, Tenn., USA
Schedule | Attending Companies | AIST’s Energy & Utilities Technology Committee

Digital Transformation Forum for the Steel Industry 
14–16 March 2022, Indianapolis, Ind., USA
Schedule | Attending Companies | AIST’s Electrical Applications/Sensors Subcommittee and Digitalization Applications Technology Committees.

Modern Electric Furnace Steelmaking — A Practical Training Seminar
7–11 February 2022, Orlando, FL, USA
Schedule | Attending Companies | AIST’s Electric Steelmaking Technology Committee

Environmental Solutions: Water Management
 9–11 November 2021, Corpus Christi, Texas, USA
Attending Companies | AIST's Environmental Technology Committee

27th Crane Symposium
15–17 August 2021 in Pittsburgh, PA
Schedule | Attending Companies | AIST's Cranes Technology Committee

AIST’s Digital Transformation Forum for the Steel Industry
17–20 May 2021, Pittsburgh, PA
Schedule | Attending Companies | AIST's Digitalization Applications Technology Committee

International Conference on Advances in Metallurgy of Long and Forged Products
12–14 July 2021, Virtual Conference

DRI & HBI Logistics, Production and Utilization Seminar
2–3 March 2021, Virtual Meeting
Schedule | Attending Companies | AIST's DRI Technology Committee

MENA Steel Forum 2020
10–12 November 2020, Virtual Meeting

MS&T20 Virtual
1–6 November 2020, Virtual Meeting

Scrap Supplements and Alternative Ironmaking 8
2–4 March 2020, Orlando, Fla., USA
Schedule | Attending Companies | AIST’s Direct Reduced Iron Technology Committee

Long Products Rolling — A Practical Training Seminar
11–13 February 2020, Jacksonville, Fla., USA
Schedule | Attending Companies | AIST’s Long Products Technology Committee

Modern Electric Furnace Steelmaking — A Practical Training Seminar
3–7 February 2020, Portland, Ore., USA
Schedule | Attending Companies | AIST’s Electric Steelmaking Technology Committee

Secondary Steelmaking Refractories — A Practical Training Seminar
15–17 October 2019, San Antonio, Texas, USA
Schedule | Attending Companies | AIST’s Ladle & Secondary Refining and Refractory Systems Technology Committees

Managing Technology — ArcelorMittal Dofasco G.P.
5–7 November 2019, Hamilton, Ont., Canada
Schedule | Attending Companies | AIST’s Project and Construction Management Technology Committee.

AIST European Steel Forum 2019
23–25 October 2019 • Leoben, Australia

Continuous Casting — A Practical Training Seminar
21–24 October 2019, Memphis, Tenn., USA
Schedule | Attending Companies | AIST’s Continuous Casting Technology Committee

Pipe and Tube — A Practical Training Seminar
24–26 September 2019, Birmingham, Ala., USA
Schedule | Attending Companies | AIST’s Pipe & Tube Technology Committee

Maintenance & Reliability for the Next Generation
10–12 September 2019, Indianapolis, Ind., USA
Schedule | Attending Companies | AIST's Maintenance & Reliability and Lubrication & Hydraulics Technology Committees.

26th AIST Crane Symposium
2–4 June 2019, Louisville, Ky., USA
Schedule | Attending Companies | AIST's Crane Technology Committee

Digital Transformation Forum for the Steel Industry
25–28 March 2019 • Pittsburgh, PA, USA
Schedule | Attending Companies | AIST’s Electrical Applications/Sensors Subcommittee and Computer Applications Technology Committees.

Specialty Alloy and Foundry — A Practical Training Seminar
18–21 March 2019, Harrisburg, Pa., USA
Schedule | Attending Companies | AIST’s Specialty Alloy & Foundry Technology Committee.

Sheet Processing and Finishing Lines — A Practical Training Seminar
17–21 March 2019, Mobile, Ala., USA
Schedule | Attending Companies | AIST’s Rolling and Processing Technology Division

Long Products Rolling — A Practical Training Seminar
25–28 February 2019, Charleston, S.C., USA
Schedule | Attending Companies | AIST’s Long Products Technology Committee

25th Modern Electric Furnace Steelmaking — A Practical Training Seminar
4–8 February 2019, Charleston, S.C., USA
Schedule | Attending Companies | AIST’s Electric Steelmaking Technology Committee

Secondary Steelmaking Refractories — A Practical Training Seminar
22–25 October 2018, Charleston, S.C., USA
Schedule | Attending Companies | AIST’s Ladle & Secondary Refining and Refractory Systems Technology Committees

Environmental Solutions: Water Management
17–18 October 2018, Indianapolis, Ind., USA
Schedule | Attending Companies | AIST Environmental Technology Committee

Continuous Casting — A Practical Training Seminar 
9–11 October 2018, Detroit, Mich., USA
Schedule | Attending Companies | AIST Continuous Casting Technology Committee

AIST European Steel Forum 2018
3–5 October 2018 • Udine, Italy

Pipe and Tube — A Practical Training Seminar
24–26 September 2018, Houston, Texas, USA
Schedule | Attending Companies | AIST Pipe & Tube Technology Committee

Maintenance Solutions: Maximizing Maintenance and Lubrication Through Planning and Prediction
17–19 September 2018,  Pittsburgh, PA, USA
Schedule | Attending Companies | AIST Maintenance & Reliability Technology Committee and AIST Lubrication & Hydraulics Technology Committee

The 2nd International Symposium on the Recent Developments in Plate Steels
3–6 June 2018, Orlando, Fla., USA
Schedule | Attending Companies | AIST Metallurgy — Processing, Products & Applications Technology Committee and AIST Plate Rolling Technology Committee

DRI & HBI: Logistics, Production and Utilization Seminar
19–21 March 2018, Charleston, S.C., USA
Schedule | Attending Companies | DRI Technology Committee

Hot Sheet Rolling and Plate Rolling Fundamentals —
Practical Training Seminars
25 February–1 March 2018, Mobile, Ala., USA
Schedule | Attending Companies | Hot Sheet Rolling and Plate Rolling Technology Committees

Long Products Rolling — A Practical Training Seminar
19–22 February 2018, Fort Worth, Texas, USA
Schedule | Attending Companies | Long Products Technology Committee

Modern Electric Furnace Steelmaking – A Practical Training Seminar
5–9 February 2018, Memphis, Tenn., USA
Schedule | Attending Companies | Electric Steelmaking Technology Committee

Maintenance Solutions — A Practical Training Seminar
6–8 November 2017, Charleston S.C., USA
Schedule | Attending Companies | Maintenance & Reliability and Lubrication & Hydraulics Technology Committees

Secondary Steelmaking Refractories — A Practical Training Seminar
23–26 October 2017 • Milwaukee, Wis., USA
Schedule | Attending Companies | Ladle & Secondary Refining and Refractory Systems Technology Committees

2nd AIST-IAS Crane Symposium
23–25 October 2017 • Rosario, SF, Argentina
Cranes Technology Committee and Instituto Argentino de Siderurgia (IAS)

Environmental Solutions: Meeting EPA Air Emission Requirements
17–18 October 2017, Indianapolis, Ind., USA
Schedule | Attending Companies | Environmental Technology Committee

Continuous Casting — A Practical Training Seminar
16–19 October 2017 • Fort Wayne, Ind., USA
Schedule | Attending Companies | Continuous Casting Technology Committee

Material Handling and Transportation Logistics Training Seminar
10–12 October 2017 • Louisville, Ky., USA
Schedule | Attending Companies | Material Handling Technology Committee / Transportation & Logistics Technology Committee

Sheet Processing and Finishing Lines — A Practical Training Seminar
17–21 September 2017 • Ypsilanti, Mich., USA
Schedule | Attending Companies | Rolling and Processing Technology Division

Managing Technology – Big River Steel
12–14 September 2017 • Memphis, Tenn., USA
Schedule | Attending Companies | Project and Construction Management Technology Committee

24th Annual Crane Symposium
11–13 June 2017 • Pittsburgh, Pa., USA
Schedule | Attending Companies | Cranes Technology Committee

6th International Conferences on Hot Sheet Metal Forming Of High-Performance Steel
4–7 June 2017 • Atlanta, Ga., USA
Schedule | Attending Companies

International Symposium on New Developments in Advanced High-Strength Sheet Steels
30 May–2 June 2017 • Keystone, Colo., USA
Schedule | Attending Companies | Metallurgy — Processing, Products & Applications Technology Committee

Steel Mill Combustion and Thermal Systems
21–23 March 2017 • Nashville, Tenn., USA
Schedule | Attending Companies | Energy & Utilities Technology Committee

Specialty Alloy & Foundry Training Seminar
13–15 March 2017 • Mobile, Ala., USA
Schedule | Attending Companies | Specialty Alloy & Foundry Technology Committee

The Making, Shaping and Treating of Steel: 101
7–9 March 2017 • Dearborn, Mich., USA
Schedule | Attending Companies

Rod and Bar Rolling – A Practical Training Seminar
20–23 February 2017 • Atlanta, Ga., USA
Schedule | Attending Companies | Rod & Bar Technology Committee

Scrap Supplements and Alternative Ironmaking Symposium
19–21 February 2017 • Orlando, Fla., USA
Schedule | Attending Companies | Direct Reduced Iron Technology Committee

Modern Electric Furnace Steelmaking — A Practical Training Seminar
6–10 February 2017 • Fort Worth, TX, USA
Schedule | Attending Companies | Electric Steelmaking Technology Committee

Continuous Casting — A Practical Training Seminar
17–20 October 2016 • Memphis, TN, USA
Schedule | Attending Companies | Continuous Casting Technology Committee

AIST European Steel Forum 2016
20–21 October 2016 • Buttrio, Italy

The Making, Shaping and Treating of Steel: 101
11–13 October 2016 • Merrillville, IN, USA
Schedule | Attending Companies

Secondary Steelmaking Refractories — A Practical Training Seminar
10–12 October 2016 • Birmingham, AL, USA
Schedule | Attending Companies | Ladle & Secondary Refining and Refractory Systems Technology Committees

23rd Annual AIST Crane Symposium
21–23 June 2016 • Indianapolis, IN, USA
Schedule | Attending Companies | Cranes Technology Committee

The Making, Shaping and Treating of Steel: 101 
8–10 March 2016 • Huntsville, AL, USA
Schedule | Attending Companies

Rod and Bar Rolling — A Practical Training Seminar
22–25 February 2016 • San Antonio, TX, USA
Schedule | Attending Companies | Rod & Bar Rolling Technology Committee

Hot Flat Rolling Fundamentals — A Practical Training Seminar in conjunction with Plate Rolling Fundamentals Training 
21–25 February 2016 • Birmingham, AL, USA
Schedule | Attending Companies |  Hot Sheet Rolling and Plate Rolling Technology Committees.

Modern Electric Furnace Steelmaking — A Practical Training Seminar
1–5 February 2016 • Jacksonville, FL, USA
Schedule | Attending Companies | Electric Steelmaking Technology Committee

Safety and Health Fundamentals: Mexico
1–4 December 2015 • Monterrey, N.L., Mexico
Schedule | Safety & Health Technology Committee and AIST’s Mexico Chapter

AIST Italy Steel Forum 2015
22–23 October 2015 • Dalmine, Italy
Schedule

AIST/IAS Maintenace, Lubrication, Hydraulics and Forensic Engineering Seminar
20–22 October 2015 • Rosario, Santa Fe, Argentina
Schedule

Continuous Casting — A Practical Training Seminar
12–15 October 2015 • Charleston, SC, USA
Schedule | Continuous Casting Technology Committee

Steel Mill Combustion and Thermal Systems
13–15 October 2015 • Indianapolis, IN, USA
Schedule | Energy & Utilities Technology Committee

Secondary Steelmaking Refractories — A Practical Training Seminar
5–8 October 2015 • Memphis, TN, USA
Schedule | Ladle & Secondary Refining and Refractory Systems Technology Committees

Pipe and Tube — A Practical Training Seminar
28 September–1 October 2015 • Cleveland, OH, USA
Schedule | Pipe & Tube Technology Committee

Maintenance Solutions — A Practical Training Seminar
20–23 September 2015 • Indianapolis, IN, USA
Schedule | Maintenance & Reliability and Lubrication & Hydraulics Technology Committees

The Making, Shaping and Treating of Steel: 101
15–17 September 2015 • Hamilton, Ont., Canada
Schedule

Safety and Health Conference
1–3 September 2015 • Indianapolis, IN, USA
Schedule | Safety & Health Technology Committee

International Conference on Advances in Metallurgy of Long and Forged Products
12–15 July 2015 • Vail, CO, USA
Schedule | Metallurgy — Processing, Products & Applications Technology Committee

Specialty Alloy and Foundry — A Practical Training Seminar
20–23 July 2015 • Monroeville, PA, USA
Schedule | Specialty Alloy & Foundry Technology Committee

22nd Annual Crane Symposium
7–9 June 2015 • Pittsburgh, PA, USA
Schedule | Crane Technology Committee

Galvatech 2015 and CHS²
31 May–4 June 2015 • Toronto, ON, Canada
Schedule

Process Systems
2–5 March 2015 • Mobile, AL, USA
Schedule | Computer Applications and Electrical Applications Technology Committees

Cold Rolling Fundamentals — A Practical Training Seminar
1–5 March 2015 • Mobile, AL, USA
Schedule | Cold Sheet Rolling Technology Committee

Rod and Bar Rolling — A Practical Training Seminar
23–26 February 2015 • Charleston, SC, USA
Schedule | Rod & Bar Rolling Technology Committee

Modern Electric Furnace Steelmaking — A Practical Training Seminar
2–6 February 2015 • Cleveland, OH, USA
Schedule | Electric Steelmaking Technology Committee

DRI: Logistics, Production and Utilization 
19–21 November 2014 • New Orleans, LA, USA
Schedule | DRI Technology Committee

Continuous Casting — A Practical Training Seminar
20–23 October 2014 • Indianapolis, IN, USA
Schedule | Continuous Casting Technology Committee

Steel Mill Combustion and Thermal Systems
14–16 October 2014 • Baltimore, MD, USA
Schedule | Energy & Utilities Technology Committee

AIST Italy Steel Forum 2014
9–10 October 2014 • Castellanza, Italy
Schedule

Ladle Refractory and Secondary Steelmaking — A Practical Training Seminar
6–9 October 2014 • Indianapolis, IN, USA
Schedule | Ladle & Secondary Refining and Refractory Systems Technology Committees

Maintenance Solutions
14–17 September 2014 • Pittsburgh, PA, USA
Schedule | Maintenance & Reliability and Lubrication & Hydraulics Technology Committees

The Making, Shaping and Treating of Steel: 101
23–25 September 2014 • Cleveland, OH, USA
Schedule

Water Management Seminar
10–12 August 2014 • Louisville, KY, USA
Schedule | Environmental Technology Committee

Pipe & Tube Essentials for the Energy Market
8–11 September 2014 • Coraopolis, PA, USA
Schedule | Pipe & Tube Technology Committee

21st Annual AIST Crane Symposium
8–10 June 2014 • Pittsburgh, PA, USA
Schedule | Cranes Technology Committee

Hot Flat Rolling Fundamentals — A Practical Training Seminar
2–6 March 2014 • Charleston, SC, USA
Schedule | Hot Sheet Rolling and Plate Rolling Technology Committees

Rod and Bar Rolling — A Practical Training Seminar
24–27 February 2014 • Fort Worth, TX, USA
Schedule | Rod & Bar Technology Committee

Modern Electric Steelmaking
3–7 February 2014 • Birmingham, AL, USA
Schedule | Electric Steelmaking Technology Committee

Steel Mill Combustion & Thermal Systems
5–7 November 2013 • Cleveland, OH, USA
Schedule | Energy & Utilities Technology Committee

Continuous Casting — A Practical Training Seminar
14–17 October 2013 • Memphis, TN, USA
Schedule | Continuous Casting Technology Committee

Operation and Maintenance of Particulate Control Equipment and Systems
7–9 October 2013 • Merrillville, IN, USA
Schedule | Environmental Technology Committee

Ladle Refractory and Secondary Steelmaking 
30 September–2 October 2013 • Charleston, SC, USA
Schedule | Ladle & Secondary Refining and Refractory Systems Technology Committees

AIST Italy Steel Forum 2013
26–27 September 2013 • Castellanza, Italy
Schedule

Asset Optimization Through Maintenance, Reliability, Lubrication and Hydraulics
22–25 September 2013 • Greenville, SC, USA
Schedule | Maintenance & Reliability and Lubrication & Hydraulics Technology Committees

Safety and Health Conference: New Technology and Innovations
10–12 September 2013 • Atlanta, GA, USA
Schedule | Safety & Health Technology Committee

The Making, Shaping and Treating of Steel: 101
9–12 September 2013 • Pittsburgh, Pa., USA
Schedule

The Making, Shaping and Treating of Steel: 101
19–21 June 2013 • San Pedro Garza Garcia, N.L., Mexico
Schedule

Process Systems Specialty Training Conference
26–28 March 2013 • Detroit, MI, USA
Schedule | Computer Applications and Electrical Applications Technology Committees

Cold Rolling Fundamentals — A Practical Training Seminar 
24–28 March 2013 • Detroit, MI, USA
Schedule | Cold Sheet Rolling Technology Committee

The Making, Shaping and Treating of Steel: 101 (MSTS: 101)
4–7 March 2013 • Birmingham, AL, USA
Schedule

Modern Electric Furnace Steelmaking — A Practical Training Seminar
4–8 February 2013 • Chandler, AR, USA
Schedule | Electric Steelmaking Technology Committee

AIST Italy Steel Forum 2012
18 October 2012 • Castellanza, Italy

Steel Mill Combustion and Thermal Systems
16–18 November 2012 • Pittsburgh, PA, USA

The Making, Shaping and Treating of Steel: 101
 15–16 November 2012 • LaQuinta, CA, USA

Scrap Supplements and Alternative Ironmaking VI
28–30 October 2012 • Baltimore, MD, USA

Continuous Casting — A Practical Training Seminar
16–18 October 2012 • Pittsburgh, PA, USA

Ladle Refractory and Secondary Steelmaking — A Practical Training Seminar
1–3 October 2012 • Jacksonville, FL, USA

Building the Future of Excellence Through Maintenance, Reliability and Lubrication
24–26 September 2012 • Charleston, SC, USA

Safety and Health Conference: A Critical Focus With Material Handling
28–30 August 2012  •  Indianapolis, IN, USA

19th Annual Crane Symposium
10–12 June 2012 • Pittsburgh, PA, USA

Water Management Seminar
18–20 March 2012 • Indianapolis, IN, USA

The Making, Shaping and Treating of Steel: 101
12–15 March 2012 • San Antonio, TX, USA

Rod and Bar Rolling — A Practical Training Seminar
27 February–1 March 2012 • Scottsdale, AZ, USA

Hot Flat Rolling Fundamentals — A Practical Training Seminar in conjunction with Plate Rolling Fundamentals Training
19–23 February 2012 • Orlando, FL, USA

Modern Electric Furnace Steelmaking — A Practical Training Seminar in conjunction with the Specialty Steelmaking Training Seminar
6–10 February 2012 • Charleston, SC, USA